Click image to view full size image
Beam clamp for supporting the beam Table Formwork
Descrition:
Beam clamp is one instrument developed and manufactured by ZULIN specially for supporting the beam formwork.
It has simplified the way of installing formwork and therefore, has greatly enhanced the efficiency of construction work.
Beam clamp can work together with beam or wood batten alongside a formwork unit, while on the bottom,
the formwork shall be fixed by timber beam and beam clamp. Floor props or scaffoldings are to be used as the
supporting system, and plywood as the panel.
Application Sketch
Beam Clamp A
| Only using beam forming support, the pouring height can reach 350mm at most. | Adding extension for beam forming support, the maximum pouring height can be 758mm. |
|
|
|
|
Beam Clamp B
|
|
| Only using beam forming support, the pouring height can reach 800mm at most. | Adding extension for beam forming support, the maximum pouring height can be 1225mm. |
|
|
|
Beam clamp for supporting the beam Table Formwork
